| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Pics of our SCHWEEEET lining clamps http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=9004 |
Page 1 of 1 |
| Author: | John Watkins [ Wed Oct 25, 2006 7:53 am ] |
| Post subject: | |
Got a sample piece from the extruder and I couldn't be happier. Works great, looks great, totally rocks. Won't be long now. I'd like to thank everyone for their continued patience. BTW, if you're saying to yourself, "what lining clamps? I want lining clamps, too!", then click here. 
|
|
| Author: | Andy Zimmerman [ Wed Oct 25, 2006 7:57 am ] |
| Post subject: | |
looking mighty fine....personally I want mine a bit thinner!!!!!!!!!! Hard to make the curves!!!!!! HA HA HA Andy |
|
| Author: | Kim [ Wed Oct 25, 2006 8:06 am ] |
| Post subject: | |
John, Can I just get 3 BIG clamps? I want 1 shaped like an SJ, one like an OM and the other one a big'ol Dred 
Look'in good John, are you going to anodise the two sizes different colours? Cheers Kim |
|
| Author: | Kim [ Wed Oct 25, 2006 8:10 am ] |
| Post subject: | |
If that's the case Hesh, John had best have them extruded in 24 carat or I'm pull'in the pin 
|
|
| Author: | Michael Dale Payne [ Wed Oct 25, 2006 8:50 am ] |
| Post subject: | |
What would be real cool would be if the inside half had a ledge that indexed the rims edge so that the top of the lining would be set 1/16" or 3/32" proud of the rim. But not everyone does this, I do to avoid sand into my prfile more than required when dome sanding. but still would be cool because not only would it clamp it would set is height in relation to the rim as well
|
|
| Author: | Steve Kinnaird [ Wed Oct 25, 2006 2:05 pm ] |
| Post subject: | |
I want mine sunburst! Steve |
|
| Author: | John Watkins [ Wed Oct 25, 2006 11:08 pm ] |
| Post subject: | |
Thanks, guys. Yes, they'll be anodized in two colors. Michael, I thought of that, but it would only work for a certain percentage of folks and it seems easier for those who would want that feature to make a slight adjustment for it in their methods. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|